TechnologyNovember 21, 2026
Using 10BASE-T1L SPE Media Converters in Retrofit Projects
Many industrial facilities want to integrate modern networking technologies with existing equipment while minimizing production downtime and installation costs, and disruption to daily operations.
Traditional Ethernet networks are typically limited to 100 meters over standard copper cabling. Extending Ethernet beyond this distance often requires additional switches, fiber-optic links, or new cable installation, increasing project complexity and cost. However, many industrial facilities already have hundreds of meters of twisted-pair wiring that was originally installed for serial communication networks, such as Modbus RTU, RS-485, and other fieldbus systems.
10BASE T1L (T1L) is an IEEE 802.3cg Ethernet physical-layer standard that enables 10 Mbps, full duplex communication over single twisted pair cabling for distances up to 1 km. Because it can operate over both existing field wiring and standard Ethernet cabling, such as Cat5e or Cat6, T1L combines the advantages of Ethernet with the flexibility and long reach traditionally associated with fieldbus and serial networks. In many cases, existing twisted-pair wiring can be reused to extend Ethernet connectivity, helping reduce installation costs and simplify network upgrades.
Native IP Connectivity
Unlike protocol gateways that translate between communication methods, T1L extends Ethernet itself over longer distances. Because T1L is part of the Ethernet standard, IP traffic runs natively across the link just as it does over conventional Ethernet networks, such as 10BASE-T, 100BASE-TX, and 1000BASE-T.
As a result, Ethernet-based industrial protocols including Modbus TCP, Ethernet/IP, PROFINET, OPC UA, and BACnet/IP can operate transparently over a T1L connection without protocol conversion.
Connecting a PLC to an HMI
The Contemporary Controls EIMK-T1L media converter bridges standard 10BASE-T Ethernet and 10BASE-T1L Single-Pair Ethernet (SPE) networks. By extending Ethernet communication up to 1 km over a single twisted pair, the EIMK-T1L provides a practical way to connect industrial equipment where installing new Cat5e or Cat6 cabling would be difficult, costly, or impractical.
Consider a manufacturing facility where a PLC is installed in a central control panel, and an HMI is located several hundred meters away on the production floor. A suitable twisted-pair cable already exists between the two locations.
Rather than installing additional switches, fiber, or new Ethernet cabling, a pair of EIMK-T1L media converters can be used to establish a long-distance Ethernet connection.
- Install one EIMK-T1L near the PLC and connect it to the PLC’s Ethernet port.
- Install a second EIMK-T1L near the HMI.
- Connect the existing single twisted-pair cable between the two EIMK-T1L units.
- Connect the HMI to the second EIMK-T1L’s RJ-45 Ethernet port.
The PLC and HMI can then communicate over Ethernet at distances of up to 1 km using the existing field wiring. Because the EIMK-T1L functions as an Ethernet media converter, protocols such as Modbus TCP, Ethernet/IP, PROFINET, and OPC UA can operate transparently across the connection.
The EIMK-T1L is a plug-and-play media converter that requires no IP address or software configuration for basic operation, simplifying installation and commissioning.
Example Use Cases
The EIMK-T1L is particularly well suited for:
- Extending Modbus TCP communications to PLC panels
- Connecting PLCs, HMIs, and drives over long distances without requiring fiber
- Extending Ethernet connectivity to motor control centers (MCCs)
- Linking control rooms to process skids and packaged equipment
- Modernizing legacy RS-485 communication infrastructures while preserving existing wiring where suitable
- Connecting pump stations, compressors, and utility systems
- Supporting Ethernet/IP, PROFINET, OPC UA, and BACnet/IP communications over long distances
- Upgrading older industrial facilities where installing new Ethernet cabling is difficult or cost-prohibitive
Conclusion
The Contemporary Controls EIMK-T1L provides a practical way to extend Ethernet communications up to 1 km over single-pair wiring. By leveraging 10BASE-T1L technology, industrial operators can often reuse existing wiring, reduce installation costs, and connect equipment to modern IP-based networks with minimal disruption. For many industrial retrofit projects, the EIMK-T1L offers a straightforward path to expanding Ethernet connectivity without extensive infrastructure changes.